Difference between revisions of "Add New Spaces"

1. Click the large Spaces icon to open the Spaces window.

2. Select a Campus if you have that option.

3. Press the Edit button on the upper right.

1. Click the Spaces dropdown.

2. Select Create.

1. Space Info
2. Space Attributes
3. Comments
4. Contents.

1. Save - To save your changes or sometimes to save your changes and move to the next screen.
2. Update Child Spaces - To update child spaces.
3. Clone Spaces - Clone a space into another space or clone a room into multiples.
4. Organize Space - When activated allows rooms to be reorganized using drag and drop.
5. Add New Child - used to add sub-spaces within a space (add Floors to Buildings, Areas to Floors etc.).
6. Delete - To delete a selected space.
7. Print - To open the print preview window.

In the Identify section under the Space Type dropdown, select Building. In the Name field type the name of the new building.

Start by adding a new floor. In the left pane: Click the tiny arrow next to MainBuilding to show the current spaces in the Main Building. The spaces "tree" will expand if there are spaces.

Space Type Examples:

1. If a Building is selected and the Add New Child button is pressed, the new space type will default to Floor.
2. If a Floor is selected and the Add New Child button is pressed, the new space type will be an Area.
3. If an Area is selected and the Add New Child button is selected, the new space type will be a Room.

To add an area, select floor and click the Add New Child button.

The floors of a building can be split up into areas. Waiting areas, Patient wings, Office areas will eventually contain rooms.

1. Enter an Area name in to the Space Info Name field. Space Type will normally default to the correct type of space for under the space selected (See Example below).

Room creations also include an additional information to fill out for Contents. Press the + Add Contents button. The Add Content window opens. Select content and press the save button.

Press the Save button to save the new room.

Error messages will advise you if something is wrong. If there are not any error messages the save is a success.

Make sure all the space details, especially for rooms, are added before cloning to save lots of extra work changing each cloned space.

Select a room and press the Clone button.

See fields for:

1. Building
2. Floor
3. Area
4. Number of Rooms (Not including the original being cloned)
5. Starting Room Number (if original room is 101 then the starting number can be 102)

Press the Save button when the criteria of the clone has been entered.

Select an Area and press the Clone button.

Note: The window is different than when cloning a room. See fields for:

1. Building
2. Floor
3. Replace this...
4. With this...

Different target locations are available to be selected. Choose to place the cloned area on another floor or create another wing on the current floor. Replace fields are to save time renaming rooms after the cloning. Areas must always be renamed to remove the "Copy of" label.

Press the Save button when the criteria of the clone has been entered.

Select a Floor and press the Clone button.

Note: The window is different than when cloning a room. See fields for:

1. Building
2. Replace this...
3. With this...

Different target locations are available to be selected. Create the cloned area as another floor. Replace fields are to save time renaming rooms after the cloning. Floors and Areas must always be renamed to remove the "Copy of" label.

Make sure the space details, especially for rooms, are added before cloning to save lots of extra work changing each cloned space.